• GEM BLN-PVRJ45-1 Balun Video Power Balun Twisted Pair BNC Adapters, Plugs
  • GEM BLN-PVRJ45-1 Balun Video Power Balun Twisted Pair BNC Adapters, Plugs

GEM BLN-PVRJ45-1 Balun Video Power Balun Twisted Pair BNC Adapters, Plugs

$13.57
$13.57

Sorry! Our GEM BLN-PVRJ45-1 Balun Video Power Balun Twisted Pair BNC Adapters, Plugs is currently sold out.

Want to be notified when it becomes available again? Simply register your interest and we'll send you a message when it does.

Manufacturer : GEM

Sku : BLN-PVRJ451

Condition : New

0 available

Add to wishlist
The Triplett gem CCTV video/power balun provides video over pins 7 and 8, and power over the other 3 pairs. Distance dependent upon current and voltage of the camera (for a 24V 130mA camera, cable length is approximately 700 feet). using a balun at each end of a UTP cable creates a more versatile and future proof system. Triplett gem baluns can enhance your system with up to 4 cameras on a single Cat5 cable. You can IP address the entire analog system plus cable in place for a full IP digital system upgrade. You can also achieve longer cable runs - Passive up to 2000 feet, active up to 1.5 miles. Triplett gem baluns also lower material cost (Cat5 versus coax cable) and reduce the labor needed during installation by using cables already in place.
  • •Bandwidth and Input: The balun operates with a bandwidth of Video DC to 8 MHz and a maximum input of 1.0 Vp-p.
  • •Impedance and Insertion Loss: It offers an impedance of 75 ohm to 100 ohm (or 75 ohm to 120 ohm on request) and a maximum insertion loss of 2 dB per pair over the frequency range from DC to 8 MHz.
  • •Impedance and Insertion Loss: It offers an impedance of 75 ohm to 100 ohm (or 75 ohm to 120 ohm on request) and a maximum insertion loss of 2 dB per pair over the frequency range from DC to 8 MHz.
  • •Connectors and Cable-UTP: The balun comes with an RJ45 jack, BNC Male, and is compatible with Cat 5 or better - 100 ohms at 1 MHz.
  • •Max Distance and Input Voltage: It supports a max distance of 2230’ (680 m) for color and 2550’ (780 m) for monochrome at 24 VAC via three pairs of a UTP Cat 5 Cable (24 AWG). The maximum input voltage is 50 volts (AC RMS/DC).