Enforcer MVE-AH1E1-01NQ HDMI Extender Over Single Cat5e/6, Supports Resolutions from 480i to 1080p, Plug and Play Operation, 2x5VDC Power Supplies Included

Seco-Larm MVE-AH1E1-01NQ HDMI Extender Over Single Cat5e/6, Supports Resolutions From 480i To 1080p, Plug And Play Operation, 2x5VDC Power Supplies Included Extend HDMI over a single Cat5e/6 cable Supports resolutions from 480i to 1080p with zero signal loss Transmits up to 164ft (50m) at 1080p over Cat5e/6 cable HDMI Loop output for local HDMI display Plug and play operation – comes as a complete set IR Pass-through for remote control extension and operation EDID Management switch Two (2) 5VDC power supplies included Specifications Input Video Signal: 3.3V Input DDC Signal: 5Vp-p (TTL) Deep Color: 24-Bit Video Format Supported: High-speed HDMI, HDCP 1.2 Audio Formats Supported: LPCM, Dolby-AC3, DTS7.1, DSD Output Video: HDMI Resolutions Supported: 1080p/1080i/720p/576p/576i/480p/480i Range - 4K: Up to 164' (50m) Video Amplifier Bandwidth: 4.95Gbps Maximum Input Cable Length: 24AWG (15m), 26AWG (10m), 28AWG (5m) Video Input Connector: HDMI Type A 19-pin female IR Pass-through Frequency: 30~60 kHz Operating Voltage: 5VDC Power Supply: 1A@5VDC (2 Adapters) (2.1mm plug) ESD Protection (Human Body Model): ±8kV (Air-gap discharge), ±4kV (contact discharge) Cat5e/6 Wiring Standard: T568-B Current Draw: Transmitter- 300mA@5VDC Receiver- 200mA@5VDC Operating Temperature: 32°~104° F (0°~40° C) Operating Humidity: 20~90% RH (no condensation) Dimensions: 31/8"x11/16"x25/8" (79x17x67 mm) Weight: 5.3-oz (150g) (Each) Maximum Single Link Range: 1080p